Thule's Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Aero Foot System.
Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
Yakima's HighLoader is a premium upright bike mount that accommodates nearly any bicycle, from sleek road bikes to 29ers with up to 3-inch-wide tires. It makes no contact with the bike frame itself, so it works great with disc brakes, full-suspension rigs and through-axles, and it's nice and easy to mount your bikes. It's also compatible with round or square crossbars, as well as factory and aerodynamic bars with Yakima's Mighty Mounts (sold separately). And it includes a dual-purpose, integrated cable lock that secures the bike to the rack, as well as the rack to the car so your stuff stays safe.
Yakima's SprocketRocket is the mount your prized possession deserves. This top-quality carrier features a quick release with an integrated adjuster knob and a sliding wheel tray, which accepts tire sizes up to three inches. Plus, the SprocketRocket has an automotive finish sure to complement your vehicle. You'll also appreciate that the wheel strap is double-sided for use on either side of your car.
Thule's Sidearm is perfect for bikes with non-traditional frame designs or unique fork/hub interfaces because it holds bikes by the wheels only. For fast and easy loading, Thule's ratcheting SecureHook clamps the front wheel, while a ratcheting strap secures the rear. The Sidearm accepts most bicycles including those with 29-inch wheels. This fine bike mount fits on square and round crossbars (sold separately).
Stop looking for footstools to get your bikes on and off your roof rack. Thule's Criterium makes mounting bikes much easier. Its sculpted wheel tray and support arm keep your bike in position while you secure it to the rack, while the rack-level dial-activated clamp firmly and safely grips the bicycle by the down tube. Unloading is a breeze, too. A push-button release frees your ride in the blink of an eye. The Criterium's dual-action wheel strap fits all tire sizes. The Criterium fits on square and round crossbars (sold separately).
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
The Thule Circuit Fork Mount low-profile carrier is designed for those looking for security, convenience and aerodynamic styling. - AeroHead low-profile reinforced head combines aerodynamics, durability and style - SecureSkewer for fast loading and security w/ Thule’s One-Key lock cylinder (sold separately) - Tool-Free universal mounting makes it simple and easy to install - Integrated wheel cradle high-wall design provides protection and perfect fit beneath your wheel - Low profile aluminum tray made from corrosion-resistant aluminum to withstand the elements - Ratcheting wheel strap quickly secures back wheel to tray - Fits most factory supplied rack systems - Works with 15mm, 20mm and lefty forks with adapter (sold separately)
When it comes to roof-mounted bike trays, Thule leads the pack. Their Paceline Fork Mount Carrier simplifies loading and unloading your bike. The one-handed closure automatically adjusts to different dropout thicknesses and optimizes clamping pressure to prevent damage to your fork from over-clamping. Its ratcheting rear-wheel strap and high-sided wheel cradle keep the rear of the bike in place while you're driving to and from your ride. There's even space for a One-Key lock cylinder (sold separately) to keep your faithful steed safe and secure. This carrier fits all Thule rack systems, third-party round bars, and most car company's factory racks.
Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Yakima's renowned ski carrier, the Powderhound, is easy to use and install. It's wide enough to carry up to four pairs of skis or two snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single button opens the Powderhound even with heavy gloves on. And, Yakima's SKS locks are included.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's updated classic ski carrier, the Big Powderhound, is easy to use and install. It's wide enough to carry up to six pairs of skis or four snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single button opens the Powderhound even with heavy gloves on. And, Yakima's SKS locks are included.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches or more
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches from end of bar
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
$119.00 - $129.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
$219.00 - $249.00
You'll have enough room for everyone with Yakima's FatCat on your roof. Featuring a low aerodynamic profile that reduces wind noise, it's wide enough to carry up to 6 pairs of skis or 4 snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single oversize button opens the FatCat so you can do it even with heavy gloves on. And, Yakima's SKS locks are included so your toys stay safe.
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Secure, sleek, and simple to use, the HighRoad is Yakima’s newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - New wheel hoop fits 26” to 29” wheels and tires from 23mm to 3.25” with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame - a great option for carbon fiber bikes and custom paint jobs - Sleek, low profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately) - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) TECHNICAL SPECS - Weight: 24.00 lbs - Dimensions: L 20.00” x W 20.00” x H 5.00”
Yakima's new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and stronghold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - Securely carries a variety of bikes including road, mountain and up to 5” fat-tire bikes. - Seamlessly carries both quick release (9 mm) and thru axle bikes (12 mm, 15 mm, 20 mm). - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low profile tray minimizes hatch interference and accomodates tires up to 5” wide. - Tool-free, universal mounting hardware fits most roof racks - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately). - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately). - Carry quick release 9 x 135 mm fat bike with the Optional Fat Bike Adapter Kit(sold separately). TECHNICAL SPECS - Weight: 20.00 lbs - Dimensions: L 22.00” x W 22.00” x H 5.00”
Get your crew out of the driveway and onto the water with this customizable boat solution. Easy to install, no tools needed to attach to any bar type out there. Comes with two saddles per package. Just pair with another set of HullHounds or HullyRollers (sold separately).
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24 inches or more
Page 1 of 4 Next page