Filter By:

Accessories

(49 matches)
Thule Upslope 20L Snowsports Backpack
$119.99
Ideal for both inbounds or the backcountry, the Thule 20L Upslope pack provides three ways to access the contents inside your pack, making it easy to store and retrieve your gear. - Access gear in the main compartment without removing the backpack through a zipper that coils around the entire pack. - Three ways to access your gear - traditional top load, sling style side access and main compartment access while back is on your back. - Versatile carry options include diagonal ski carry or horizontal and vertical snowboard carry. - Bottom loop on ski and snowboard carry quickly adjusts for varying widths of skis and boards and stows to prevent snagging. - Insulated hydration sleeve helps prevent your hose from freezing. - Protective goggle pocket with soft, fleece like lining. - Stowable ice axe loop holds a mountain tool but can be tucked away to prevent snagging. - Side zipped pocket stores snacks, sunscreen and other small items. - Internal compression cinches down your load to prevent gear from sloshing around in your pack. Technical specifications - Material: 420D Cordura Nylon - Volume: 1200 cu in - Height: 19.3 in - Depth: 10.20 in - Length: 11.8 in - Weight: 1.76 lb
Swix  BP99 Base Prep 180 gr.
$32.99
Base prep wax for warmer conditions. It is an all around prep wax for most skis to be used on new skis and as a travel wax. Recommended for Hot Box use. (under 55 degrees C)
Swix  CH10X Yellow Glide Wax 180 gr.
$36.99
Temperature range from 0øC to 10øC (32øF to 50øF). Recommended iron temp: 120øC (248øF). A new wax for the Cera Nova X line made a slightly harder than the old CH10 Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes it more durable than before. Good wax for base prep and training. For racing we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix  CH10X Yellow Glide Wax 60 gr.
$12.99
Temperature range from 0øC to 10øC (32øF to 50øF). Recommended iron temp: 120øC (248øF). A new wax for the Cera Nova X line made a slightly harder than the old CH10 Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes it more durable than before. Good wax for base prep and training. For racing we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix  CH4X Green Glide Wax 60 gr.
$12.99
Temperature range from -12øC to -32øC (10øF to -25øF). Recommended iron temp: 155øC (311øF). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.
Swix  CH5X Turquoise Glide Wax 60 gr.
$12.99
Temperature range from -8øC to -14øC (18øF to 7øF). Recommended iron temp: 150øC (311øF). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It's easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.
Swix  CH6X Blue Glide Wax 60 gr.
$12.99
Temperature range from -5øC to -10øC (23øF to 14øF). Recommended iron temp: 145øC (293øF). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix  CH7X Violet Glide Wax 60 gr.
$12.99
Temperature range from -2øC to -8øC (28øF to 18øF). Recommended iron temp: 140øC (284øF). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. It is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix  CH8X Red Glide Wax 60 gr.
$12.99
Temperature range from -4øC to 4øC (25øF to 39øF). Recommended iron temp: 130øC (266øF). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix  Cork Natural with Felt
$6.99
Natural cork with felt, great for applying Cera F and buffing.
Swix  Cork Synthetic
$5.99
Synthetic cork for hard wax (and powders)
Swix  Economy Waxing Iron
$59.99
Economy wax iron for all disciplines. Ergonomic handle and temperature adjustment wheel. Thick metal plate ensures a stable heating of the base.
Swix  F6 Blue Liquid Glide Wax 80 ml
$19.99
-6 C to -15 C (25F to 5F) Fluorinated liquid wax with wide range on cold side. For all snow conditions.
Swix  F7 Violet Liquid Glide Wax 80 ml
$19.99
+1 C to -6 C (34F to 22F) Fluorinated liquid wax with wide range around freezing. For all snow conditions.
Swix  Fiberlene Towel 20m
$8.99
Fiberlene for efficient cleaning. Small 20m
Swix  Fluor Base Cleaner Aero Spray 70 ml
$14.99
Cleaner for Fluor Glider & Conditioner for Racing Skis! • Involves no hard mechanical treatment of the base. • No wearing of the stone grind pattern in the ski base. • Makes the ski faster! Cleaner for fluoro glide wax and CH wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards.
Swix  HF10BWX Black Glide Wax 40 gr.
$99.99
Temperature range from -4øC to 4øC (25øF to 39øF). Recommended iron temp: 140 ø C A new wax for the Cera Nova X line made harder than the old HF8BW. The BW solid lubricant additive reduces the friction in contaminated snow. The adjusted hardness makes the wax more durable and absorbs less dirt. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF08BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC08X and HVC Warm (FC80L)
Swix  HF10X Yellow Glide Wax 40 gr.
$99.99
Temperature range from 0øC to 10øC (32øF to 50øF). Recommended iron temp: 120øC (248øF). A new wax in for the Cera Nova X line made a little bit harder than the old HF10. Our test result shows that a slightly harder wax performs better in this area compared to the old classic, especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10X can be used as a race wax alone, but is often used as a base for Cera F, such as FC10X and HVC Warm (FC80L).
Swix  HF5BWX Black Glide Wax 40 gr.
$99.99
Temperature range from -8øC to -14øC (18øF to 7øF). Recommended iron temp: 150øC (311øF). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It was a demand from alpine and has been used with great success in World Cup over the last two seasons. Cross country is also discovering HF05BWX with great interest. The lower melting point compared to the 4 series makes it easier to work with, without sacrificing the good glide properties in cold conditions. HF05BWX is a new special wax with BW solid lubricant additive that reduces friction when very cold snow and dry friction conditions. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF05BWX can be used as a race wax alone or as a base for Cera F powder,
Swix  HF5X Turquoise Glide Wax 40 gr.
$99.99
Temperature range from -8øC to -14øC (18øF to 7øF). Recommended iron temp: 150øC (311øF). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It was a demand from alpine and has been used with great success in World Cup over the last two seasons. Cross country is also gradually discovering HF05X and we see more and more servicemen who prefer this wax in cold conditions. The lower melting point compared to the 4 series makes it easier to work with, without sacrificing the good glide properties it has in cold conditions. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF05X can be used as a race wax alone or as a base for Cera F powder, such as FC05X.
Swix  HF6BWX Black Glide Wax 40 gr.
$99.99
Temperature range from -5øC to -10øC (23øF to 14øF). Recommended iron temp: 145øC (293øF). Our std. HF6BW recipe has proven to be too good to be dropped and is therefore continued as HF06BWX in the new Cera Nova X range. The BW solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It's a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF06BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC06X and HVC Cold (FC60L).
Swix  HF6X Blue Glide Wax 40 gr.
$99.99
Temperature range from -5øC to -10øC (23øF to 14øF). Recommended iron temp: 145øC (293øF). Our std. HF6 recipe has proven to be too good to be dropped and is therefore continued as HF06X in the new Cera Nova X range. It's a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF06X can be used as a race wax alone, but is often used as a base for Cera F, such as FC06X and HVC Cold (FC60L).
Swix  HF7BWX Black Glide Wax 40 gr.
$99.99
Temperature range from -2øC to -8øC (28øF to 18øF). Recommended iron temp: 140øC (284øF). A new wax with an improved recipe, proven to be significant better than the old HF7BW. A versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The BW solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It's a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF07BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC07X and HVC Cold (FC60L).
Swix  HF7X Violet Glide Wax 40 gr.
$99.99
Temperature range from -2øC to -8øC (28øF to 18øF). Recommended iron temp: 140øC (284øF). A new wax with an improved recipe, proven to be significant better than the old HF7. A versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF07X can be used as a race wax alone, but is often used as a base for Cera F, such as FC07X and HVC Cold (FC60L).
Swix  HF8BWX Black Glide Wax 40 gr.
$99.99
Temperature range from -4øC to 4øC (25øF to 39øF). Recommended iron temp: 140 ø C A new wax for the Cera Nova X line made harder than the old HF8BW. The BW solid lubricant additive reduces the friction in contaminated snow. The adjusted hardness makes the wax more durable and absorbs less dirt. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF08BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC08X and HVC Warm (FC80L)
Swix  KX20 Green Base Klister
$20.99
Base klister for cold and warm conditions. To be used as first layer for other klisters. Always to be applied thin with an iron or heat gun. High wear resistance and adhesion. Scraper included.
Swix  KX30 Blue Klister
$20.99
0øC to -12øC (32øF to 10øF). For frozen, icy tracks and cold conditions. Can be used as base klister on wet snow. Scraper included.
Swix  KX35 Violet Special Klister
$20.99
+1øC to -4øC (32øF to 25øF). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.
Swix  KX40S Silver Klister
$20.99
+2øC to -4øC (36øF to 25øF). Developed for transformed and fine grained snow. Very good when warmer than 0øC and relatively fine grained snow. The klister that goes the farthest into dry snow without icing! Scraper included.
Swix  KX45 Violet Klister
$20.99
-2øC to +4øC (28øF to 39øF). All round klister. For wet coarse snow as well as frozen corn snow. Scraper included.
Page 1 of 2 Next page